Somero STS-132 Topping Spreader

The new Somero STS-132 Topping Spreader replaces the STS-130. This completely redesigned Topping Spreader allows you to accurately and efficiently spread dry shake toppings on concrete floors and slabs. The STS-132 is ideally suited to accurately spread toppings on wide placements, immediately following the Somero Laser Screed.

The new STS-132 gives you the freedom to pour any width, shape or size, cutting you loose from the limitations of conventional spreaders. The high level of maneuverability allows you to easily work closely around columns and other obstructions. Save time and labor with the STS-132. You can spread more than 120 square feet of toppings with each pass of the STS-132, which takes just 8 seconds! With the large capacity material bin and bulk loading option you can get spreading fast and keep spreading with no down time. The STS-132 features new electronic joystick controls, automatic feed system, computer adjustable parameters, and increased capacity. Shake-on hardeners are being specified at an increasing rate. Be ready to take advantage of this opportunity with the Somero STS-132 Topping Spreader.

STS-132 Specification

General Dimensions:
Overall Width	7' - 4" (2.23 m) Outside of Tires
Overall Length	18' - 4" (5.3 m) Driving with boom retracted
	39' - 9" (11.4 m) Spreading with boom extended
Overall Height	8' - 0" (2.45 m) at top of Operator's Seat
Ground Clearance	0' - 10" (0.25 m) under raised stabilizers
Weight (Nominal)	14,000 lbs (6350 Kg) empty
	16,500 (7484 Kg) Full hoppers
Boom Travel	21' - 5" (6.52 m)
Wheel Base	5' - 6" (1.68 m)
Track	6' - 0" (1.84 m)
Fluid Capacities:
Fuel Capacity	24 gallons (90.9 l)
Hydraulic Reservoir	31 gallons (117.4 l)
Engine Oil	14 quarts (13.24 l)
	Engine coolant same as oil
Capacities:
Spread Hopper	300 lbs (136 kg) rated capacity, 4.6+ cubic ft. (0.13+ cu. m) rated volume, Capable of 2 to 4 passes per filling
Bulk bin	2500 lbs (1134 kg) rated capacity, 15.5 cubic ft. (0.44 cu. m) rated volume
General Machine Performance
Maximum Speed	4.07 mph (6.55 km/h) high range
Turning Radius	10' - 3" (3.11 m) Outside of wheels
	3' - 2" (0.98 m) Inside of wheels
	12' - 5" (3.78 m) Outer driving
Spreading area	128.5 sq. ft. (12 sq. m) per full pass
Spreading time	10 - 30 seconds per full pass (subject to material and application rate)
Steering
Type	Steering Wheel controlled, Hydraulic power-assist with metering unit control
Operating Modes	2 Wheel, 4 Wheel, Crab Steer
Power Unit
Engine	4 cylinder diesel
Power	45.5 kW (61 HP) (intermittent @ 2700 rpm)
Fuel	No. 2 diesel fuel
Engine Type	4 cylinders, 3.58 inches bore, 4.41 inch stroke
Electrical System	12 V, 55A Alternator, 950 CCA Battery
Cooling System	Lubricating oil-cooled
Control	Hand-actuated throttle with electric shutoff
Tires	Armstrong Flow-Trac Lug, size 31x15.5-15 NHS 8 ply rating
Wheels	9-bolt/9.50 in, size 15x13 LBH rim